Fields — 3D Scene and Camera

With a 3D Plot open, select Plot and choose 3D kind and scalar…. If you reopen a Graph with saved presentation settings, previous values in native_presentation → plot_config may override the settings shown here. Check the result. If it differs, reconcile the relevant keys in the technical view or rebuild the figure in a new independent Workspace. Apply starts preparation. Wait for Native3D draft ready. The previous frame may remain visible while waiting. Esc or Cancel native preparation cancels the proposal and retains the accepted state.

FieldUse and effect
3D plot title (auto = Z vs X/Y)Draft title. Blank or auto generates the title from the variables.
X-axis label (auto = variable + display unit); Y-axis label (auto = variable + display unit); Z-axis label (auto = variable + display unit)Explicit labels of the three axes; blank use variable and display units.
3D plot typeline3 connects X/Y/Z samples. scatter3 shows points. surface, mesh and heatmap require a supported grid. contour3 shows levels. trisurf uses supported triangulation. Choose based on the actual topology. A saved native_presentation → plot_config → plot_type can silently take precedence. If the view does not match, save a Workspace copy, open Advanced PlotSpec and align that value with the Scene setting or remove the key. Validate and inspect the view.
Point order for line3dataset_order preserves the original order. sort_x orders by X. Available for line3. Line segments provide no additional measurements.
Legend contentauto chooses automatically, none suppresses the legend, series shows series entries, and family shows family members when available.
Family legend prefix (auto = Family variable)Prefix for family labels when Family is bound. auto uses the variable name.
Line width (line3/mesh/contour3; inherit)Line width for the indicated types. inherit uses the renderer’s setting.
Marker size (scatter3 only)scatter3 marker size, initially 5. Does not apply to surfaces.
Contour levels (contour3 only)Number of contour3 levels, initially 12.
3D display reduction (inherit or explicit)inherit uses the inherited policy, auto lets the renderer choose, none disables reduction, stride selects samples at regular intervals, and minmax uses extrema when the topology supports it. A canonical two-dimensional grid may reject minmax to keep values aligned with their physical coordinates. Reduction affects only the view.
3D display target points (inherit or 100..8000000)Integer target from 100 to 8,000,000 or inherit when used by the reduction policy. It is a target, not an exact count. With stride on 1,200 points, targets of 100 and 300 displayed 101 and 301 points, respectively. When reopening a Graph with saved presentation, the dialog can show the new target while the renderer still uses the old one. If the reduction differs, also inspect native_presentation → plot_config in Advanced PlotSpec and reconcile reduction_mode and target_points. Validate and apply. For example, use stride and 100 in both sections. A saved value can mask an out-of-range entry, so verify the rendered result.
Additional output formatnone does not require additional output; svg and pdf require SVG vector format or additional PDF document supported by the rendering owner respectively.

In the 3D Dataset and variables… dialog, Z Variable ID, Independent scalar C Variable (optional), Family Variable (optional) and Native 3D kind complement Dataset/X/Y. Z Variable ID binds the third spatial coordinate. Choose a variable whose shape matches the X/Y data. Family Variable (optional) groups samples by value and creates family members when the representation supports them. Leave it blank for a single ungrouped source. Select Apply, then check the view and legend. In Native 3D kind, choose scatter3 for points, line3 for a line in space, surface for a gridded surface, mesh for the line grid, contour3 for 3D contours, trisurf for a triangulated surface, or heatmap for a grid color map. Required shapes vary by type. C supplies independent scalar mapping when bound. Shape and topology must be compatible. The engine rejects C with line3 and contour3. Clear C or choose a compatible scientific plot type. The previous draft remains available. Without C, the owner uses its default interpretation.

Native camera

FieldUse and effect
camera positionEye position as X;Y;Z in the native scene coordinate system.
camera targetObserved point as X;Y;Z. Use a target distinct from the camera position.
camera upNondegenerate X;Y;Z orientation vector, independent of the scientific axis units.
projectionorthographic keeps the apparent scale independent of distance. perspective makes apparent size depend on distance.
orthographic heightPositive height of the orthographic view. Changing it reframes the view.
near clip; far clipUse valid, ordered clipping distances. near must be positive and far must exceed near. In the technical dictionary, add both keys together if they are absent. Adding only one is rejected. Geometry outside the clipping range may disappear.
vertical fov degreesValid vertical perspective field of view in degrees. It controls the camera projection.